Tavan Sanat Low Voltage Capacitor Banks

Tavan Sanat LV capacitor banks are used for centralized compensation of power factor in low voltage installations.

These equipments are supplied completely assembled and ready for use: it is only necessary to connect it to the mains with cables of adequate cross section, and to supply the operation signal from a suitable current transformer.

GENERAL CHARACTERISTICS
Tavan Sanat Low Voltage capacitor banks are composed of the following elements:
    • High rupturing capacity (HRC) fuses connected to a busbar system.
    • Contactors specially adapted to the work with capacitors.
    • Inrush current limiting inductances.
    • Fast discharge resistors.
    • Low losses power capacitors.
    • Reactive power controllers.
    • Terminals for neutral and ground conductors.
    • Metal cabinet containing all the switchgear.
ADVANTAGES
    • Equipments wired and tested at works, full finished and supplied with all control and safety devices.
    • Easy transportation and installation due to their light weigh.
    • Easy selection of the most appropriate cos φ to avoid penalty charges on tariffs.
    • Long life and high reliability, thank to the use of self-healing and low losses capacitors.
    • Wide range of power (from 5 to 1600 kvar, 440 V) with standard equipments for immediate delivery.
    • Option of including various accessories.
SPECIAL EQUIPMENT
On request, automatic capacitor banks can be produced to customers special requirements. Among the different possibilities are the following:
  • Other voltages and frequencies.
  • Capacitor banks with different degrees of protection.
  • Capacitor banks for outdoor installation.
  • Working program 1:2:4:4:, 1:2:4:8:, 1:1:2:2:.
  • Fixed step (for transformer compensation).
  • Higher powers than the above stated.
230 / 440 /690
V
Rated voltages
50 - 60
HZ
Rated frequency
5 to 3000
KVAR
Rated power
< 0.2
W/kvar
Dielectric losses
< 0.5
W/kvar
Capacitors losses
1.1 (8h / day)
Un
Maximum overvoltage
1.3
ln
Maximum overcurrent
On each contactor
 
Fast discharge resistors
MCE ADV or Master controller
 
Regulation equipment
1:1:1:1 / 1:2:2:2 / 1:2:4:4 /1:2:4:8 / 1:1:2:2 /...
 
Working programs
230
V
Control voltage
... /5 (Optional)
 
External current transformer
-25ºC/+45 ºC max. temp.
 ºC
Temperature range
IP 4x
 
Degree of protection
Indoor
 
Installation
IEC 61921:2017
 
Standars
INA/INR (7% / 14%) Optional
 
Harmonic Filter
TOP